Installing Alpha Nir Hardware - FLIR Alpha Nir User Manual

Alpha NIR User's Guide 412-0007-10 Ver 150

1.2 Installing Alpha NIR Hardware

Note: This instruction set is pertinent to users that purchased the developer's kit for
installation on their own computer. If you purchased a turn-key system complete with
computer, please skip this section.
The Alpha NIR Imaging kit you have purchased should include:
1) Alpha NIR sensor head
2) 25mm C-mount lens
3) Tripod adapter plate
4) Connector Support
5) Tripod Mounting Screws
6) Power cord and AC/DC converter
7) Alpha NIR Setup disc
8) Settings file CD for the camera enclosed
9) IMAQ PCI-1422 frame grabber board
10) NI IMAQ Version 2.5.1 CD and documentation
11) IMAQ cable assembly for Alpha NIR
12) Carrying case
Available optional accessories:
1) Lens, 25mm, 50mm, Zoom
2) Computer System
3) LabVIEW Tool Kit
4) External Sync Cable
5) NIR Calibration Light Box
6) Internal Filter Holder (see figure 1 on p.14)
The Alpha NIR Imaging Kit has been tested and can be expected to work properly on a
computer that is configured as follows:
• Windows NT 4.0 w/ Service Pack 6 or Windows 2000 Service Pack 2
• Pentium IV 1.5 GHz or faster recommended
• 250 Mb RAM, 512 Mb recommended
• Available PCI slot
• High Resolution Graphics Adapter and Monitor
To install the Alpha NIR Imaging Kit, perform the following steps:
1) Insert Alpha NIR Setup disc 412.0007.35
2) Using MS Explorer, find the CD folder "NI-IMAQ"
8
INDIGO OPERATIONS