2N Helios IP Configuration Manual page 52

JPEG Video Setting
Anonymous access
You can download a JPEG video from any IP address without authentication.
Otherwise, the video is only accessible after login or during a call if the Call
activation is enabled.
Call activation
Set whether the JPEG video is available to the terminal upon the call beginning.
The function must be supported by the terminal (Snom 820/870, e.g.).
Frame rate
Set the transmission rate to be offered to the end terminal.
JPEG quality
Set the JPEG image quality. The recommended value is 85. The parameter affects
the image size and quality.
JPEG Video Use
The JPEG video can be used for any application that is capable of downloading

JPEG images from 2N
To load an image from a camera enter any of the links below in your web

browser:
http://helios_ip_address/enu/camera160x120.jpg
http://helios_ip_address/enu/camera320x240.jpg
http://helios_ip_address/enu/camera352x272.jpg
http://helios_ip_address/enu/camera352x288.jpg
http://helios_ip_address/enu/camera640x480.jpg
Be sure to enable the Anonymous access to the JPEG video (see above) for
this function.
You can assign displaying JPEG images to a Snom 820/870 terminal button.

To do this, set the Action URL function and enter one of the commands below
as the parameter:
Chyba! Odkaz není platný. or
http://helios_ip_address/enu/snom870-video.xml.
®
Helios IP web interface.
Configuration 2.3
52