Network - 2N Helios IP Configuration Manual

Door intercom

Hide thumbs Also See for Helios IP:

Table of Contents

Network

This menu is used for setting the 2N

of these parameters will not show until the next 2N

By default, obtaining the IP address from the DHCP server is switched on in

Helios IP (DHCP client enabled). To find the IP address of your 2N

the 2N

Helios IP Network Scanner program included on the CD. If, in your LAN, the

DHCP server is not used or properly configured for your 2N

the appropriate quick dialling button sequence to switch 2N

address mode (see the Device configuration subsection of 2N

Manual).

Figure 2.9

Network Parameter Setting

DHCP Settings

DHCP client enabled

Switch on the function of obtaining the IP address from the DHCP server.

Configuration

Helios IP network parameters. A change of any

Helios IP restart.

Helios IP, use

Helios IP, you can push

Helios IP into the fixed IP

Helios IP Installation

2.3

Table of Contents

Helios ip