Entering Commands Using Tone Dialing (Dtmf Suffix Dialing) - Siemens Hipath 4000 Operation Manual

Step by step
More features?
g
DTMF suffix dialing?
Entering commands using tone dialing
(DTMF suffix dialing)
This function must be configured by your service
personnel.
After dialing a phone number you can set tone dial-
ing. This allows you to use command entries to control
Dualtone Multi-Frequency (DTMF) devices, such as an-
swering machines or attendant systems.
v
Open the service menu
Select and confirm the option shown.
Select and confirm the option shown.
You can now enter commands using the keys 0 - 9, the
asterisk key, and the pound key.
Ending the call also deactivates DTMF suffix dial-
ing.
Depending on your system configuration, "DTMF
suffix dialing?" may appear in the display once
you have finished entering the number. You can
then enter commands immediately after dialing
the phone number.
Making Calls – Convenience Functions
page 37.
69