Configuring Repdial Keys; Configuring Via A Sensor Key - Siemens Hipath 4000 Operation Manual

Step by step
if nec.
Assign phone number (selected dial
Save & exit
Save & exit

Configuring repdial keys

You can program repdial keys with external phone num-
bers on two levels. To program the second level, you
must configure a "Shift" key
See also
You can program repdial keys in two ways:
•

Configuring via a sensor key

• Configuring using the service menu
Configuring via a sensor key
R
Press the "Shift" key. The key LED lights up.
S
Press and hold the required sensor key.
Confirm the option shown.
The "Programming speed dial destination" page opens.
d
Select the "Number" entry.
Confirm the option shown.
j
Enter the phone number.
d
Select the "Label" entry.
Confirm the option shown.
j
Enter the required key label text
If you do not complete this field, the key label will
show "R". You can change the key label later
page 91.
b
Select the "Options" entry.
Confirm the option shown.
Confirm the option shown.
Programming Sensor Keys
page 83.
page 36.
page 85
page 86
page 23.
85