EGi DOMOS2 User Manual page 40

5. Press the MENU key several times until BELL appears.
6. Press (OFF/–) or (OK/+/ON) to choose NO (deactivated) or YES (activated).
DOOR PHONE
p o r t 1
nd
2
st
1
surveillance functions
BABY SITTER FUNCTION
Using this function, you will be able to listen any room in the installation and check easily if a baby is resting
quietly or an ill person is in need.
1. Press MENU key several times until VIGIL appears on the display.
2. Then, press (OK/+/ON). VIGL appears.
3. Press (OFF/–) and (OK/+/ON) to select YES (activated) or NO (deactivated).
4. The zone under surveillance indicator triangle is on.
SURVEIL
www.egiaudio.com
control unit
40250, 40260
BELL
A DJ U ST M B E L L
nd
2
st
1
SURV-Y
nd
2
st
1
LISTEN FUNCTION
When the babysitter configuration is finished, another control unit must be set
to listen the surveilled zones. This way, you will listen any sound coming from
these zones.
If the babysitter function is active in more than one room, the system will poll
them every 10 seconds. On the display, the zone under surveillance will appear.
To configure this do as follows:
1. Press MENU key several times until VGLA appears on the display.
2. Then, press (OK/+/ON). VIGLDO appears
3. Press MENU key. LSN appears on the display.
4. Press (OFF/–)and (OK/+/ON) to select YES (activated) or NO (deactivated).
5. The listen mark appears on the display.
NOTE. To use this services, "NO DISTURB" must be deactivated.
(Please, refer to "Other functions").
LSN–N
40
LSN–S
nd
2
st
1