EGi DOMOS2 User Manual page 29

40230, 40240
p o – 1
nd
2
BELL FUNCTION
All the DOMOS2 Central units are ready to have the door bell connected.
When the door bell is rang, a tune is generated in the areas of the installation
with the service activated.
To activate this service: :
1. Press MENU key 4 times AUD > INT > VIG > ADJ.
2. Press (OK/+/ON) for 2 seconds.
3. Press the MENU key several times until BE-Y appears.
4. Press (OFF/–) or (OK/+) to choose NO (deactivated) or YES (activated).
– A d j
nd
2
st
1
control unit
surveillance functions
st
1
BABY SITTER FUNCTION
rd Using this function, you will be able to listen any room in the installation and check easily if a baby is resting
3
quietly or an ill person is in need.
1.
2.
3.
4.
b e - y
29
Press MENU key several times until VIG appears on the display.
Then, press (OK/+). VIGL appears.
Press (OFF/–)and (OK/+) to select YES (activated) or NO (deactivated).
The zone under surveillance LED lights
V i G L
.
V i G L
nd
2
st
1
www.egiaudio.com