EGi DOMOS2 User Manual page 26

NOTE: This process can be aborted at any time by pressing the MENU exit key
– A d j – S E T
nd
2
st
1
audio functions
From your EGi ref. 40230 and 40240 control unit, you will have control over the audio programs in your
installation.
VOLUME CONTROL
To modify the volume in the room where the control unit is installed, press (OK/+) to increase or (OFF/-)
to decrease the volume.
PROGRAM CHANGE
Depending on the central unit and the control unit of your system, up to 3 programs can be chosen. (Three
general and a local one, depending on the control unit).
To change between available programs, press the MENU key
using (OK/+) check the available programs.
NOTE: You can exit to the main menu at any point by pressing EXIT MENU key
www.egiaudio.com
control unit
40230, 40240
.
R S E T
nd
2
st
1
until AUD appears on the display. Then,
twice.
VOLUME
S T 0 1
RADIO STATION TUNING AND MEMORIZATION
To select a radio station in the local tuner or the central unit, please do as
follows:
1. Press repeatedly the MENU key
2. Then, press (OK/+) to visualize PR-1. (If you are tuning a local program,
L will appear).
3. Press the MENU key
of the tuned station.
4. If you press (OFF/–) or (OK/+) then, you will see the memory position
and frequency for the stored radio stations.
5. By pressing the MENU key
6. Press shortly (OFF/–) or (OK/+) to increase or decrease the tuned
frequency manually. If you make that press longer, the search will be
performed automatically, and SRCH will appear on the display.
7. Once the radio station has been chosen, pressing the MENU key
present SAVE on the display.
26
PROGRAM CHANGE
– A V D P R . – 1
until AUD appears on the display.
again and M followed by the memory position
again, SCAN will appear on the display.
will