EGi DOMOS2 User Manual page 11

40020, 40040, 40060
for DIN rail mounting
audio functions
Depending on the model, 1 (40020), 2 (40040) or 3 (40060) audio programs
can be configured in the system.
These audio programs can be different radio stations or Central Unit RCA
stereo input.
CHANGE PROGRAMS
To select any of the programs:
1. Press MENU key until AUDIO appears on the screen. From this menu,
audio can be activated or deactivated using (OK/+) or (NO/–).
2. With AUDIO in YES position, press (OK/+) again to go to program 1,
2 or 3 (if available).
st
1
A U D I O
Y E S
nd
2
central units
P RO G R A M
a U D
st
1
nd
2
11
SELECT A RADIO STATION OR RCA AUDIO FOR A PROGRAM
Once the program that is tuning a radio station is selected, if you want to change this radio station, please
do as follows:
1. Select the PROGRAM following the steps described at
2. Press MENU key . Now, using (+) and (–) check the different stored radio stations for the program.
The RCA audio input can also be selected here (AUD appears on the screen).
3. If you want to listen a radio station that is not stored, press MENU again and SEARCH will appear
on the display. Press (+) or (–) for 2 seconds to perform an automatic search, or short pressings for
manual search.
4. If a non stored radio station is tuned, the frequency value flashes. Pressing MENU key
have the chance to store it. Press (+) or (–) shortly to select the memory position (1 to 9) where you want
it stored and press (OK/+) for 2 seconds. SAVED appears on the display.
nd
2
P RO G R A M
9 2 . 0
st
1
2
st
1
S A V E
9 1. 3
nd
2
6
"Change programs".
st
1
M E M O R Y 3 S E A RC H
9 2 . 8 8 9 . 7
nd
2
2
SAV E D
9 1. 3
www.egiaudio.com
again, you
st
1
nd
2