1. Manuals
  2. Brands
  3. EGi Manuals
  4. Home Theater System
  5. DOMOS2
  6. User manual

EGi Domos2 User Manual

Hide thumbs Also See for Domos2:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
english
user's manual
Electroacústica
General
Ibérica, S. A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Domos2 and is the answer not in the manual?

Questions and answers

Related Manuals for EGi Domos2

Summary of Contents for EGi Domos2

  • Page 1 english user's manual Electroacústica General Ibérica, S. A.
  • Page 2 Dear customer, Thank you for choosing EGi Sound & Domotic System for your home. DOMOS2 System enables you to enjoy high quality audio in any room of your home, as well as intercom and domotic services that make your everyday life easier and safer.

  • Page 3: Simbols

    Turned on Listen function Gas alarm main features of the DOMOS2 series Turned off Intercom function Flooding alarm • Up to 5 audio programs. • Remote control over the audio sources. Clock Intruder alarm (1 and 2) • Control over the installation with a remote...

  • Page 4: Information

    • EGi will not be held liable for any damage arising from misuse of the product or usage other than what is was designed by EGi and connected or used by any module in the DOMOS2 series.

  • Page 5: Table Of Contents

    index Simbols Information 40010, 40020, 40040, 40050, 40060 Central units for DIN rail mounting 40070, 40080, 40090, 40200 Central units for Ø60 mm box 40220, 40221, 40271, 40281, 40620, 40300, 40310 Controls units 40410, 40420, 40521 Interface modules 40610, 40140, 40510 Auxiliary modules Accessories www.egiaudio.com...
  • Page 6 3 RCA AUDIO INPUT (3 AUDIO PROGRAMS) overview Central units in a DOMOS2 installation, distribute audio and manage additional services provided by the series. Central Units can manage up to 50 zones and, depending on the model, distribute up to 3 general stereo EGi ref.

  • Page 7: Central Units For Din Rail Mounting

    To reset or change the configuration on a system using the central unit Message recording is allowed when using control units EGi ref. 40220, 40221, 40271 and 40281. Please module EGi ref. 40050 or 40010, the control unit configuration manual refer to the control unit manual for details.
  • Page 8 The RCA inputs in the central unit connect to the music source. This music source can be controlled through the infrared capsule EGi ref. 40110, using the sound system own remote from the room where it is being listened, just pointing the remote control to the EGi in-wall control unit.
  • Page 9 Central Units can manage up to 50 zones and, depending on the model, distribute up to 3 general stereo audio programs. The central module must be connected to a power supply unit (EGi ref. 40710, 40720 or 40730) that provides the needed power for proper function of the system.
  • Page 10 CLOCK CONFIGURATION Once the DOMOS2 system has been correctly installed, the different modules must be configured for proper One of the central unit main functions is to manage the services provided by performance whitin the system. Each room is called a ZONE.
  • Page 11 central units 40020, 40040, 40060 for DIN rail mounting audio functions SELECT A RADIO STATION OR RCA AUDIO FOR A PROGRAM Depending on the model, 1 (40020), 2 (40040) or 3 (40060) audio programs Once the program that is tuning a radio station is selected, if you want to change this radio station, please can be configured in the system.
  • Page 12 central units 40020, 40040, 40060 for DIN rail mounting DELETE A STORED RADIO STATION To configure this service: Press MENU key until AUDIO appears on the screen. From this menu, audio can be activated or Press MENU key until CARILLON appears on the screen. Use (OK/+) deactivated using (OK/+) or (NO/–).
  • Page 13 (OK/+) or (NO/–). Your EGi DOMOS2 system can control and listen any zone of the installation. DOORBELL FUNCTION This service is used from the control units, altough it must be activated in the central unit.
  • Page 14 (OK/+) or (NO/–). more adjustments On top of the previous services, your DOMOS2 central unit provides the following parameters and services. To configure the rest of adjustments, please follow the procedure ahead: m i s c e l l .
  • Page 15 central units 40020, 40040, 40060 for DIN rail mounting BLOCKING RADIO STATION MODIFICATION CENTRAL UNIT FM MEMORIES This parameter, if activated, allows the change of radio station for the selected 40020 program only to the control unit that set it first. This way, changing the preset 40040 station by another user is avoid.
  • Page 16 central units 40020, 40040, 40060 for DIN rail mounting TECHNICAL SERVICE INFORMATION M I S C E L L , A DJ U ST M S T I M . A D J . If you need technical support on the product, it is possible that you are asked about the software version and other parameters.

  • Page 17: Central Units For Ø60 Mm Box

    1 USB INPUT overview 40090 Central unit gives additional services to your DOMOS2 installation. It provides the clock for the The function of the DOMOS2 central units ref. 40070 and 40080 is to give installation and manages room-to-room intercom, acoustic surveillance (baby sitter) and SOS function.
  • Page 18 Connect a 40110 wire to the IR connector of the 40070 central unit and put the capsule on the audio source (from MEM 1 to MEM 9). sensor in order to control the audio source from any room with a DOMOS2 in-wall control unit, using the RADIO STATION SEARCH remote control of the audio source or 40100/40130 remote control.
  • Page 19 SAV E SAV E D EGi control units are factory calibrated to deliver optimum performance. Nevertheless, there might be situations, where FM reception is not good enough. In those situations, manual gain adjustment could sort out the problem. To perform this operation, do as follows: Press the MENU key several times until ADJUSTM is displayed.
  • Page 20 central units 40070, 40080, 40090, 40200 Ø 60mm box BLOCKING FUNCTION SOFTWARE VERSION Using this funtion, only one control unit will control the program. If you need technical support on the product, it is possible that you are asked about the software version. To check this parameter, do as follows: If you select NO, any control unit can change the radio station of the program at any moment.

  • Page 21: Central Units For Din Rail Mounting

    CLOCK + INTERCOM + SURVEILLANCE + SOS + DOOR PHONE Press the MENU key several times until SET PR is displayed. Press (OK/+) and (NO/–) to select the number of the program between EGi ref. 40090 1 and 3. Menu key.
  • Page 22 central units 40070, 40080, 40090, 40200 Ø 60mm box other configurations SOFTWARE VERSION If you need technical support on the product, it is possible that you are asked BACKLIGHT ADJUSTMENT about the software version. To check this parameter, do as follows: Press the MENU key several times until ADJUSTM is displayed.
  • Page 23 NOTE: You can abandon the programming at any time by pressing the Exit MENU key several times. EGi ref. 40200 WARNING: If you change the language on the central unit, all control units configured in AUTO mode will also change the language.

  • Page 24: Controls Units

    EGi ref. 40221 enable you to control audio functions included in the DOMOS2 series. They have a backlit LCD screen, a built-in FM tuner (only model 40221) and rocker technology to navigate between menus. These control units offer access to the following services: •...
  • Page 25 control unit 40220, 40221 ASSIGNING ZONES From the Central unit: To assign a zone number to a control unit, do as follows: If your installation has a Central unit with a menu option (Central units refs. 40020, 40040 and 40060) you can initialise Installation set up from this unit.
  • Page 26 control unit 40220, 40221 You have reset the installation and you will now have to assign a zone number to each control unit, to VOLUME CONTROL CHANGING PROGRAMMES do this follow the procedure described above. NOTE: You can revert to the main menu at any time by pressing the upper part of the display twice. A U D A U D m i s c e l l...
  • Page 27 When you have selected the position, press on ( ) for a longer period. One of the additional features of the DOMOS2 system is the possibility of communicating from any point The frequency will stop flashing and SAVED will be displayed.
  • Page 28 control unit 40220, 40221 ALARM CLOCK FUNCTION If the alarm clock is on, and the buzzer indicates NO, the device will use the last programme listened to for the alarm clock function. When the alarm clock The control unit has a built in alarm clock function that either switches the system on at a preset hour or has been configured, it can be connected or disconnected easily.
  • Page 29 control unit 40220, 40221 Navigate through the options by pressing the lower part of the control SETTING THE TIME unit, until TIMER is displayed. Configure this function as follows: Press the left (–) and right-hand buttons ( ) to choose the switch off Press the key at the bottom twice for one second, until AUDIO is displayed.
  • Page 30 This function, when you press the lower area of the control unit for 5 seconds, or press the remote control (also for 5 seconds) (EGi ref. 40100 or 40130) will activate a warning buzzer in the zone where the alarm occurred. If, within...
  • Page 31 40281 DOMOTIC LCD. 3 AUDIO PROGRAMMES + LOCAL FM + IR overview EGi control units ref. 40271 and 40281 enable you to control and configure many audio as well as domotic EGi ref. 40281 functions, included in the DOMOS2 series. They have a backlit LCD screen, a built-in FM tuner with RDS channel information (only model 40281) and rocker technology to navigate between menus.
  • Page 32 On pressing ( ) for 3 seconds, the rest of the controls in the installation, When you have received the EGi control units ref. 40271 or 40281, you should programme the equipment except those already programmed will move to 12 (in the example).
  • Page 33 control unit 40271, 40281 RESETTING ZONE ASSIGNMENT IN THE SYSTEM If you wish to carry out the SETUP again, you will have to reset the installation m i s c e l l a d j u st m S E T U P r e s e t –...
  • Page 34 control unit 40271, 40281 VOLUME CONTROL CHANGING PROGRAMMES To delete a station stored in a memory position, select this memory position following the instructions of points 4 and 5. When this has been done, press the lower part of the display until you see DELETE.
  • Page 35 Pressing the bottom of the control unit again after finishing the operation, will One of the additional features of the DOMOS2 system is the possibility of communicating from any point give access to the BALANCE function. This function can increase the power of the installation.
  • Page 36 CARILLON FUNCTION The DOMOS2 door phone function will enable you to answer a call to your house This function will only appear in the control unit menu if the chime service is activated in the Central unit.
  • Page 37 A function offered by the control unit for monitoring the zone where it is installed. This can be used to know if a baby All DOMOS2 series Central units are designed so that you can hear your doorbell or a sick person needs attention. This option is available if listening permission is enabled on the control unit.
  • Page 38 control unit 40271, 40281 HEAR FUNCTION other functions When you have configured one or several control units for surveillance, it is necessary to configure the one DO NOT DISTURB from where you are going to listen to the zone(s) to be monitored. If you wish not to be disturbed by the intercom, the doorbell, the door phone This will enable you to listen to any sound coming from the zones with the surveillance-babyphone or any other service causing an action in the zone where the control unit is...
  • Page 39 control unit 40271, 40281 Press the key at the bottom briefly and pass AUDIO > INTERCOM > SURVEIL > If the alarm clock is on, and the buzzer indicates NO, the device will use the last programme listened to for until you reach MISCELL.
  • Page 40 control unit 40271, 40281 Select the desired hour using the control unit side buttons. Press the lower part of the control unit to move to minute setting in the same manner. m i s c e l l a d j u st m T I M E R Now the hour and minutes of the system are set.
  • Page 41 control unit 40271, 40281 Keep the right-hand side key ( ) pressed while you speak, in order to more adjustments record the message. TALKING will be shown on the display. ADJUSTING BACKLIGHT POWER This function enables you to adjust the intensity of the control unit backlight when it is off. To enable m i s c e l l R E C M E S T A L K I N G...
  • Page 42 TEMPERATURE VIEWING AND ADJUSTMENT Your EGi control unit ref. 40271/40281 includes an ambient temperature sensor. By default, this sensor’s reading is displayed on screen when the control unit is in standby. If you do not want it on the display, do...
  • Page 43 Press the key at the bottom twice for one second, until AUDIO is displayed. If your DOMOS2 installation has a 40540 relay module associated to the zone where the control unit is installed Press the key at the bottom briefly and pass AUDIO > INTERCOM > SURVEIL >...
  • Page 44 2 seconds, the signal will be transmitted to the entire installation and If your DOMOS2 installation has an EGi relay module ref. 40540 associated to zone 0 (GENERAL), you will remain active for 2 minutes if it is not cancelled before this time through can enable or disable the relays corresponding to GENERAL SERVICES 7, 8, 9 and 0 (see documentation any control unit.
  • Page 45 control unit 40271, 40281 SELECTING ZONE NAME Enables you to select the name of the room where the control unit is located. m i s c e l l a d j u st m Z O N e T O I L E T Do this as follows: Press the key at the bottom twice for one second, until AUDIO is displayed.
  • Page 46 DESKTOP AUDIO DOMOTIC TOUCHSCREEN LCD. 3 AUDIO PROGRAMMES + LOCAL FM + IR overview EGi control units ref. 40300 and 40310, are the most advanced solution in the range of EGi control units. Enabling EGi ref. 40300 you to control and configure many audio as well as domotic functions, included in the DOMOS2 series.
  • Page 47 control unit 40300, 40310 screen in ACTIVE mode SURVEILLANCE MODE On pressing key , the zone will be ready for listening from another zone in active hearing mode. So you can hear what is happening in the room and will be able to immediately attend a sick person or baby. HEAR MODE Pressing this key will leave the zone ready to be listened in to by one or more zones with the surveillance mode on.
  • Page 48 control unit 40300, 40310 PROGRAMMES MESSAGE To record a message: Press to select the desired audio programme. Keep the message key pressed. Depending on your installation, you can choose between programmes 1, 2, 3 or the local FM tuner (L). The general call key will be displayed flashing.
  • Page 49 control unit 40300, 40310 screen in AUDIO mode To enter AUDIO mode, press key to select programmes or switch on According to the programmes in your installation (1, 2 or 3) pressing key will switch between the available programmes, as well as the local programme. LISTENING TO A RADIO STATION Press the key to select programmes until you find an FM programme.
  • Page 50 control unit 40300, 40310 LIGHT "OFF" Use the arrows to adjust the background light of the control unit when on standby. Press to confirm. AUTOSCAN Press the key to enter the menu. It will automatically store the strongest stations. BASS Press the key to enter the menu.
  • Page 51 control unit 40300, 40310 screen in DOMOTIC mode To enter DOMOTIC mode, press for selecting audio/domotic. You can take action on the domotic functions that affect a zone (local) or general (affecting the entire installation). To switch between one mode and the other, press the domotic mode key You will see either GENERAL or LOCAL on the display.
  • Page 52 control unit 40300, 40310 BEEP KEYS LISTENING Press the key to enter the menu. Press key to enter the menu. Enable or disable the production of a beep sound when a key is pressed. When you are in the menu, use the arrows to select listening enabled YES or disabled NO.
  • Page 53 control unit 40300, 40310 THERMOSTAT / CHRONO-THERMOSTAT Confirm by pressing ENTER Control unit 40300 can be programmed to operate as a chrono-thermostat. Then choose START TIME for the timer. To do this, HEATING must be on. Confirm by pressing ENTER Choose END TIME for the timer to conform.
  • Page 54 control unit 40300, 40310 SETUP Press key to enter the menu. Use the arrows to select the zone number you wish to assign to the control unit (1 to 49). You can then RESET the entire installation by pressing ENTER when RESET is displayed instead of ZONE.
  • Page 55 1 2 : 3 1 (work, leisure, area illumination…). EGi control unit ref. 40620 acts on the EGi regulator module ref. 40550, which really controls the lights. Your installer will correctly configure this equipment.
  • Page 56 Press the lower part of the control unit (3) briefly until VER - is displayed. The As well as programming ambients, it is possible to carry out other adjustments of your EGi control unit ref. 40620. number displayed is the software version.

  • Page 57: Interface Modules

    Press the MENU key . The LED light on the right will start blinking. It allows you to open the door or cancel the intercom using the DOMOS2 in- Press the MENU key again . d is displayed.
  • Page 58 Number varies depending on the number or houses connected to the device. not work properly, after selecting the correct brand name; please contact EGi Technical Assistance Service. Our technical department will help you to configure it in tb User mode:...
  • Page 59 If "St" appears instead of "SI" on the display, the module is programd. It works in a similar fashion to the EGi module ref. 40410, although it will be To reprogram, press the house code on the street plate several times, while "SI" flashes until "A1"...
  • Page 60 Status LED indicator. Communication through telephone. Power ON LED indicator. Internal relay. • Intercom to communicate with the DOMOS2 system zones (from 1 to 9) through telephone. • General call pressing 0. NOTE: The voice mail, or any other restrictions should not be active in the 40521: SIM card .
  • Page 61 interface modules 40521 functions FUNCTION MENU FUNCTION GSM interface module interacts over: Access Deactivate the alarm that has gone off. alarm menu • Alarms. Arm intruder alarm. Disarm intruder alarm. • Intercommunication. Go back to the main menu. • Relays. Access Talk to the selected zone (one key press to talk, In two situations:...
  • Page 62 interface modules 40521 Press the MENU key until GSM is displayed. The message must be as follows: Press (OK) to access to the screen. Introduce the PIN code of the card that has been inserted into the Incoming The telephone can call the module. GSM module.
  • Page 63 interface modules 40521 G S M S E T G S M S E T S M S G S M O K WARNING: Your installer must have inserted a SIM card in the corresponding slot in the GSM module. Check that you have the corresponding documentation, the card’s PIN and PUK.

  • Page 64: Auxiliary Modules

    1 AUDIO INPUT + 1 HEADPHONES OUTPUT MODULE overview Intruder detector. DOMOS2 auxiliary modules have been designed to give additional functions to your installation or adapt • Possibility to programme the EGi module ref. 40610 in AREA 1 or 2 detection mode.
  • Page 65 40140 Auxiliary module has one stereo audio input (1) through a 3.5 mm jack connector. It allows the connection of an external audio source using the EGi wire of ref. 0501 or 0503. It also has one stereo headphones output (2).
  • Page 66 DOMOTIC CENTRAL UNIT + PC CONNECTION overview Your domotic central unit can manage different sensors for detecting fire, gas, flooding or intruders. EGi ref. 40510 It also allows the configuration of different domotic scenes, home access control, and communication with other modules of the installation, such as 40521 GSM interface module –...
  • Page 67 auxiliary modules 40510 alarms FIRE FLOODING Your domotic central unit can manage different sensors for detecting fire, gas, flooding or intruders. To configure it, do as follows: f i r e G A S w a T e r y e s y e s y e s FIRE ALARM...
  • Page 68 auxiliary modules 40510 When this time is finished, ALARM SET is displayed on the domotic central unit display. Once the SERVICE has been configured, press MENU to configure the activation time of the relay. ON TIME is displayed. When the system detects presence, ALARM ACT is displayed and the central unit activates the countdown time Press (OK/+) and (NO/–) to adjust the hour.
  • Page 69 auxiliary modules 40510 presence simulation P R S . S I M . M I M I C S I P R S . S I M . The domotic central unit allows the system to simulate the presence of people at home, giving you home security when nobody is at home.
  • Page 70 auxiliary modules 40510 access control It is possible to activate (OK/+) or not activate (NO/-) the RELAY 7 for the corresponding domotic scene (a). Your domotic central unit allows access control and presence detection through 40610 module. To view the registry with home entries and exits, do as follows: Once RELAY 7 has been configured, press MENU key to configure...
  • Page 71 auxiliary modules 40510 To configure these parameters, do as follows: p r o g r a m o n T i m e o n T i m e y e s : 0 8 1 3 : DATE ADJUSTMENT Press MENU key several times until ADJUSTMS is displayed.
  • Page 72 auxiliary modules 40510 Press (OK/+) for at least 2 seconds. HOUR is displayed and the hour digit blinks. LANGUAGE SELECTION Press MENU key several times until REL. OUT is displayed. Press MENU key several times until ADJUSTMS is displayed. Press (OK/+) and (NO/–) to program the relay in order to activate it, if a specific alarm goes off (fire, Press (OK/+) for at least 2 seconds.

  • Page 73: Accessories

    It is possible to choose between basic equipments such as the G13U loudspeaker for in-wall mounting in Ø 60 mm be able to control them from your EGi remote control, without using the remote box or the G14A loudspeaker for in-ceiling mounting, which delivers exceptional quality sound.
  • Page 74 Not using the product for usual purposes, or not following the Due to EGi’s policy of continuous improvement, the company reserves the right to modify the products at any time. Although every instructions from EGi for the correct use and maintenance of the effort is made to ensure documentation is up to date, documents and illustrations may differ from the actual product purchased.
  • Page 75 Avda. Almozara, 79 50003 Zaragoza - SPAIN T. +34 976 40 53 56 F. +34 976 40 53 54 http//: www.egiaudio.com e-mail: export@egiaudio.com...

Table of Contents