Central Units For Din Rail Mounting - EGi DOMOS2 User Manual

40070, 40080, 40090, 40200
for
3. Press the MENU key several times until SET PR is displayed.
4. Press (OK/+) and (NO/–) to select the number of the program between
1 and 3.
l I G H T S E T P R
nd
2
st
1
LANGUAGE SELECTION
The menu language can be selelected. To choose your language, please do as
follows:
1. Press the MENU key several times until ADJUSTMS is displayed .
2. Press the (OK/+) key for a few seconds.
3. Press the MENU key several times until LANGUAGE is displayed.
4. Press (OK/+) and (NO/–) to select the language.
l i g h t l a ng
nd
2
st
1
central units
Ø 60mm box
40090
P R 2
40090 Central unit for Ø 60 mm box gives additional services to your installation such as clock, room-to-
room intercom, acoustic surveillance (baby sitter) and SOS function.
Intercom services are automatically configured when the module is connected and they are managed from
the control units. However, the colck service must be manually configured, please do as follows:
1.
2.
e ng l i s h
3.
4.
5.
6.
NOTE:
21
CLOCK + INTERCOM + SURVEILLANCE + SOS + DOOR PHONE
1 Menu key.
5
2 Menu exit key.
3 OK/+ key.
4
4 NO/–key.
2
5 LCD display.
Press the MENU key several times until ADJUSTMS is displayed.
Press the (OK/+) key for a few seconds.
Press the MENU key several times. TIME ADJ is displayed.
Press (OK/+), and adjust the hour by pressing (OK/+) or (NO/–) again
Once the hour has been adjusted, press the MENU key
Press (OK/+), and adjust the minutes by pressing (OK/+) or (NO/–)again.
This central unit for Ø 60 mm box is not compatible with a central unit for DIN rail mounting.
EGi ref. 40090
3
1
in order to adjust the minutes.
www.egiaudio.com