EGi DOMOS2 User Manual page 27

40230, 40240
8. Choose the memory position to store the radio station pressing (OFF/–)
or (OK/+) shortly. Once you have chosen the memory position, press
(OK/+) for 2 seconds. The frequency will stop flashing and AUD appears
on the display.
DELETE A PRESET STATION
1. To delete a preset station, select the memory position following the
procedure described previously (points 3
2. After this, press MENU key until DEL appears.
3. Press (OK/+) to confirm deletion.
NOTE: You can exit to the main menu at any point by pressing EXIT MENU
key twice.
– A V D
S c A N
st st nd
1 1 2
nd
2
control unit
ECUALIZATION (bass and treble), BALANCE AND VOLUME CONFIGURATION
If you want to make modifications to the audio, please follow these instructions:
1.
2.
3.
4.
and 4).
5.
6.
NOTE:
n . – 1
st
1
nd
2
S A v 3
nd rd
2 3
st
1
27
Press MENU key a few times until AUD appears on the display.
Press (+/OK) and use MENU key to navigate the menus until B appears.
Press (OFF/–) or (+/OK) to enhance or soften low frequencies.
Once the low frequencies are adjusted, press again the MENU key
frequencies (T appears on the display) repeating 3.
To choose the balance level, press again the MENU key
to the left or right speaker.
By pressing the MENU key again, the volume function (V-) appears on the display. Use (OFF/–)
and (ON/+) to adjust it.
You can exit to the main menu at any point by pressing EXIT MENU key
– A V D b . 3
nd st
2 1
st rd
1 / 3
to do the same with high
and use (OFF/–) and (ON/+) to send power
twice.
T. 3 B A . R 3
st st st st
1 1 1 1
nd nd
2 2
www.egiaudio.com
st
1
nd
2