Trusted Platform Module; Installing The Trusted Platform Module - Dell PowerEdge R530 Owner's Manual

Trusted Platform Module

The Trusted Platform Module (TPM) is used to generate/store keys, protect/authenticate passwords, and
create/store digital certificates. TPM can also be used to enable the BitLocker hard drive encryption
feature in Windows Server.
CAUTION: Do not attempt to remove the Trusted Platform Module (TPM) from the system board.
Once the TPM is installed, it is cryptographically bound to that specific system board. Any
attempt to remove an installed TPM breaks the cryptographic binding, and it cannot be re-
installed or installed on another system board.

Installing the Trusted Platform Module

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
CAUTION: Do not remove an installed Trusted Platform Module (TPM). Any attempt to remove an
installed TPM from the system board may damage the TPM.
Steps
1. Align the edge connectors on the TPM with the slot on the TPM connector.
2. Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the system
board.
3. Press the plastic bolt until the bolt snaps into place.
Figure 51. Installing the TPM
1. TPM
126
Safety instructions.
Before working inside your system.
2. TPM connector