About Boot Manager; Entering Boot Manager; Boot Manager Main Menu; About Dell Lifecycle Controller - Dell PowerEdge R530 Owner's Manual

Menu Item

About Boot Manager

Boot Manager enables you to add, delete, and arrange boot options. You can also access System Setup
and boot options without restarting the system.

Entering Boot Manager

The Boot Manager screen allows you to select boot options and diagnostic utilities.
1. Turn on or restart your system.
2. Press <F11> when you see the message <F11> = Boot Manager.
If your operating system begins to load before you press <F11>, allow the system to finish booting,
and then restart your system and try again.

Boot Manager main menu

Menu Item
Continue Normal Boot
One Shot Boot Menu
Launch System Setup
Launch Lifecycle Controller
System Utilities

About Dell Lifecycle Controller

Dell Lifecycle Controller allows you to perform useful tasks such as configuring BIOS and hardware
settings, deploying an operating system, updating drivers, changing RAID settings, and saving hardware
38
Description
in the operating system does not support UEFI video output standards.
This field is only for UEFI boot mode. You cannot set this to Enabled if
UEFI Secure Boot mode is enabled.
Description
The system attempts to boot to devices starting
with the first item in the boot order. If the boot
attempt fails, the system continues with the next
item in the boot order until the boot is successful
or no more boot options are found.
Takes you to the boot menu where you can select
a one time boot device to boot from.
Enables you to access the System Setup.
Exits the Boot Manager and invokes the Lifecycle
Controller program.
Launches system utilities menu such as system
diagnostics and UEFI shell.