Remote Control Operation - moon i-5 Owner's Manual

MOON i-5 Integrated Amplifier

Remote Control Operation

Figure 3: SRM Remote Control
____________________________________________________________________________________
Remote Control Operation
The MOON i-5 Stereo integrated amplifier uses the 'SRM' simple
function, all aluminum remote control (figure 3). It operates on the
Philips RC-5 communication protocol and is can be used with other
Simaudio MOON components such as the P-3 preamplifier and the
i-5080 integrated amplifier.
The 'SRM' remote uses three AAA batteries (included). To install
them, use the supplied Allen key to remove the three screws
located on the back plate; insert the batteries in the correct
direction and then screw the back plate back into place.
The button located on the upper left will switch the
POWER
integrated amplifier to either 'Stand by' or 'On' mode.
The button performs in exactly the same way as the
INPUT
'Input' button located on the i-5's front panel, sequentially
cascading through each of the integrated amplifier's inputs.
The and
VOL+ VOL–
the volume level.
The and buttons control channel balance; Pressing the left
arrow button causes a decrease in the volume level of the right
channel; pressing the right arrow button causes a decrease in the
volume level of the right channel.
The button, located in the middle of the volume and balance
MUTE
buttons, performs the identical function as the 'Mute' button located
on the i-5's front panel.
buttons increase and decrease, respectively,
11