Remote Control Operation - moon i-3 Owner's Manual

MOON i-3 Integrated Amplifier

Remote Control Operation

Figure 3: SRM Remote Control
____________________________________________________________________________________
Remote Control Operation
The MOON i-3 Stereo integrated amplifier uses the 'SRM' simple function, all
aluminum remote control (figure 3). It operates on the Philips RC-5 communication
protocol and is can be used with other Simaudio MOON components.
The 'SRM' remote uses three AAA batteries (included). To install them, use the
supplied Allen key to remove the three screws located on the back plate; insert the
batteries in the correct direction and then screw the back plate back into place.
The POWER button located on the upper left will switch the integrated amplifier to
either 'Stand by' or 'On' mode.
The INPUT button performs in exactly the same way as the 'Input' button
located on the i-3's front panel, sequentially cascading through each of the
integrated amplifier's inputs.
The VOL+ and VOL– buttons increase and decrease, respectively, the volume level.
The and buttons control channel balance; Pressing the left arrow button causes
a decrease in the volume level of the right channel; pressing the right arrow button
causes a decrease in the volume level of the right channel.
The MUTE button, located in the middle of the volume and balance buttons, triggers
a decrease in the output gain setting to a factor of 10% of the current setting. For
example, if your current setting was '30' and you pressed the "Mute" button, the gain
setting will drop to '3'. Pressing the "Mute" button a second time will reinstate the
output gain level back to '30'.
8