Controls, Connectors And Indicators - Observint ECO4IR Installation Instructions Manual

SECTION 1: SYSTEM OVERVIEW

1.1 Controls, connectors and indicators

Your new security system is easy to use and easy to setup. This section includes the function and use of the components included
with a ECO4IR system. For installation instructions, refer to Section 2. System setup, including advanced control and configuration
procedures, is included in Section 3.
ECO4 DVR Front Panel
LED Indicator|
Panel
Button Usage
Select any single camera channel (channel 1, 2, 3, or 4 )to display, or select the 4-channel display.
Infrared Sensor Sensor for the remote control.
Enter Press to confirm a menu choice.
Use arrow buttons to move among the menu items. Press Enter (
t q p u
the menu system. Generally, use the
POWER/REC
Video Playback
Standard controls for playing back a selected video track.
Controls
is activated, press this button to play/pause playback.
MENU Opens the main menu window
Side panel USB 2.0 port (see below). This port can be used for a portable mobile HDD, flash drive, DVD burner, firmware upgrade,
USB
etc. Note: Connect the mouse to the USB port on the back panel.
Side Panel
2
Single/Multi Camera Display Select
Menu
Use to power on the DVR, and start and stop manual recording.
USB Port
Video Playback Controls
8
) to confirm your choice. Use these buttons to navigate through
t u
buttons to move to selection boxes, and use
u/II:
Opens video search and playback menu. When the playback mode
Infrared
Sensor
Enter
tqpu
Power/
Record
Navigation Buttons
q p
to select submenu parameters.
Menu