Table of Contents
Advertisement
SECTION 7: DVR SYSTEM MENUS
VGA (display resolution): Options include 1024 x 768 (XGA) and 1280 x 1024 (SXGA).
The DVR will restart if the display resolution is changed.
NOTE
Sequential Time (SEC): This sets the pause time when auto-sequence is enabled. Value: 1 – 300 seconds.
Channel: Select the channel to setup for privacy. Privacy areas are configured through the Area Covered options.
Area Covered: Set privacy area. Up to four areas of privacy can be configured for each channel. Privacy areas appear as black
rectangles over portions of the video image that are setup as "private."
7.5 Network
Move the cursor to NETWORK (the icon will be highlighted when selected), and press ENTER to open the Network configuration
window. In this window, you can configure network, DDNS, email, and mobile access settings.
The default IP addresses and port settings of your DVR may be different from those shown in this document. Always use
NOTE
network settings that are compatible with your network(s).
7.5.1 Network Setup
After selecting network mode, static, DHCP, or PPPOE allocation, and setup the web port, you can access the DVR remotely across
the internet.
STATIC network settings
When selecting STATIC allocation, you must enter the IP address, subnet mask, gateway, and a web port.
66
Advertisement
Table of Contents
