Table of Contents
Advertisement
8. Click the checkbox to the right of the HDD LOSS label to enable this alarm. When the HDD is not available, this feature will
sound the buzzer and place the
9. Click the checkbox to the right of the VIDEO LOSS label to enable this alarm. When a video signal from a channel is not
detected, this feature will sound the buzzer and place the Video Loss label in the channel LIVE view window.
10. After configuring your network settings, click the confirm icon (
button in the Note window.
11. Press the MENU button on the front panel, or right click anywhere to return to the ALARM menu.
3.6.1 Motion detection setup
Motion detection can be configured for each channel individually, or you can apply the same settings to all channels at one time.
1. On the ALARM tab menu, click the >> icon on the MOTION line to open the MOTION DETECTION SETUP menu.
2. Click the q icon at the right end of the CHANNEL line. From the dropdown list, select the camera channel number you want
to setup, or select ALL to configure all channels.
3. Click the q icon at the right end of the SWITCH line. From the dropdown list, select ON or OFF to enable or disable motion
detection on the channel(s).
on the desktop.
4-Camera H.264 Security System Setup Guide
a
) in the lower right corner of the screen, click the Confirm
SECTION 3: SYSTEM SETUP
27
Advertisement
Table of Contents
