Table of Contents
Advertisement
3. Connect a display device to the DVR. If using a VGA monitor for a display, connect it to the VGA MAIN OUT connector. If using
the BNC MAIN OUT connector to drive a display such as a TV, attach the appropriate cables between the BNC MAIN OUT and
your display device.
4. Connect the 5-way power splitter to the power adapter, then:
a. Connect the lead marked DVR POWER to the DC 12V connector on the DVR back panel.
b. Connect the other leads of the splitter to the mating connectors on the video/power extension cables routed to the
cameras.
5. Connect the power cord to the power adapter and plug it into a standard grounded 120 Vac power source through a UPS or
surge protector.
6. Power on your system monitor.
7. Press the power button on the DVR front panel to power on the unit. A startup "Loading" screen will appear on the display.
After a few seconds, the screen will change to the camera view screen.
Note: The images you see from your cameras may be different from those shown here.
2.6 Adjusting the camera
Adjust your camera to produce the best performance:
While observing video from your camera, loosen the directional adjustment set screw on the camera mounting assembly, aim
•
the camera at your surveillance target, then tighten the directional adjustment set screw.
SECTION 2: INSTALLING YOUR SYSTEM
..
4-Camera H.264 Security System Setup Guide
11
Advertisement
Table of Contents
