SECTION 3
System Setup
Setting up your DVR includes logging into your DVR, setting the clock, setting administrator and user account passwords, and
setting up scheduled and/or automated motion recording.
3.1 Login to the DVR
Initially, two access accounts are provided in your system: Admin and user1. With the Admin login, you can make configuration
changes to the system, create user accounts and passwords, and control the privileges allotted to each account. With the factory
default user1 account login you cannot make configuration changes or create accounts, but can change your own password. The
factory default Admin and user1 account passwords are:
Admin:
user1:
To log into the system:
1. Power on the DVR and wait until it advances to the camera view screen. A typical camera view screen is shown below.
NOTE
During initial startup of the system, no password is required.
Image from
Channel 1
Camera
2. Press the MENU button on the front panel twice, or right-click the mouse twice anywhere on the screen. An Input
Password window will appear.
888888
666666
4-Camera H.264 Security System Setup Guide
SECTION 3: SYSTEM SETUP
13