Verify Local Network Connectability With Ie - Observint ECO4IR Installation Instructions Manual

SECTION 4: NETWORKING YOUR DVR

4.1.1 Verify local network connectability with IE

After your DVR is setup on a local network, IE is used to verify connectability across the LAN. It also increases flexibility for
monitoring and configuring your security system.
Before you can connect to the DVR with IE, the (default) security settings in IE are modified and an additional software is installed.
1. At your PC, load IE.
2. Open the IE Tools pull-down menu and select Internet Options. Click the Security tab.
3. Click the Custom Level... button. In the Settings list, change the following settings to Enable:
Automatic prompting for ActiveX controls
—
Initialize and script ActiveX controls not marked as safe for scripting
—
Script ActiveX controls marked safe for scripting
—
Binary and script behaviors
—
Download signed ActiveX controls
—
Download unsigned ActiveX controls
—
Run ActiveX controls and plug-ins
—
36