Table of Contents
Advertisement
SECTION 3: SYSTEM SETUP
In the example above, NORMAL recording was scheduled for Monday through Saturday between 7 AM and 8 PM. MD
recording was scheduled for Monday through Saturday between 3 AM and 7 AM and between 8 PM and midnight, and on
Sunday between 3 AM and midnight.
14. Click the confirm icon (
15. If you setup the record schedule for a single channel, repeat this procedure to setup the other camera channels.
16. Press the MENU button on the front panel to return to the RECORD tab.
3.4 Video configuration settings
The video configuration settings affect the appearance of the camera video on the monitor. The configuration can be se setup for
each individual camera, or the same settings can be applied to all cameras.
1. Click the Settings icon on the Tool Bar. The SYSTEM tab window will open.
2. Click VIDEO to open the VIDEO settings menu.
3. Click the q icon at the right end of the CHANNEL line. From the dropdown list, select the number of the camera channel you
want to setup, or select ALL to configure all channels.
4. Initially, camera channels are named CH1 .. CH4. You can change the name of the channel by clicking on the entry field on the
NAME line to open a virtual keyboard. Use the keyboard to enter a new name, if needed, then click the = button to close the
keyboard.
5. Click the q icon at the right end of the POSITION line. The position option selects where the camera channel NAME appears
on the live display. Choose one of the flowing: U-L (upper left), D-L (lower left), U-R (upper right), or D-R (lower right).
22
a
) in the lower right corner of the screen, then click the Confirm button in the Note window.
Advertisement
Table of Contents
