Table of Contents
Advertisement
SECTION 7: DVR SYSTEM MENUS
HDD FULL: You can set buzzer alarm and I/O output alarm when there is a defined space remaining for HDD to recording. Options
are OFF, 1G, 5G , 10G, 1 hr, 5 hrs , 10 hr and 20 hr .
HDD LOSS: ON causes the relevant alarm to occur when there is no HDD installed. An alert icon will be displayed on the left bottom
of channel 1 in the live view.
VIDEO LOSS: ON causes the relevant alarm to occur when a channel has no video input.
If the buzzer alarm is OFF, exception alarms will not be triggered.
NOTE
7.6.5 Motion Detection
Click Tool Bar -> System settings -> Alarm -> Motion to open the motion detection menu. In this menu, you can set the
Sensitivity, MD Detection area, Output, Record, Buzzer, Prerecord, and Email parameters.
72
Advertisement
Table of Contents
