SECTION 3: SYSTEM SETUP
2. Click the q icon at the right end of the OVERWRITE line. From the dropdown list, select the option you prefer:
Close: When the HDD becomes full, no additional recordings are written to the HDD
—
Overwrite: Recordings on the HDD are overwritten when the HDD becomes full. The oldest recording is overwritten
—
first.
1 HOUR .. 90 DAYS: Recordings are overwritten when older than the time selected.
—
3. Click the confirm icon (
4. Press the MENU button on the front panel or click on the desktop to return to the SYSTEM tab.
3.3 Record configuration settings
The recording settings of each camera channel can be specified separately or collectively. These settings, including the recording
schedule for each channel, are setup through the Record tab.
1. Click the Settings icon on the Tool Bar. The SYSTEM tab window will open.
2. Click RECORD to open the RECORD settings menu.
3. Click the q icon at the right end of the CHANNEL line. From the dropdown list, select the number of the camera channel you
want to setup, or select ALL to configure all channels with the same settings.
4. Click the q icon at the right end of the RECORD line. From the dropdown list, select DISABLE, or ENABLE to record video from
the channel.
5. Click the q icon at the right end of the BITRATE line. Select GOOD, NORMAL, or LOW. A GOOD bitrate produces the best
recording quality, but uses more processing power and hard disk space.
20
a
) in the lower right corner of the screen, then click the Confirm button in the Note window.