Table of Contents
Advertisement
Safety Instructions
Read these instructions and keep them in a safe place for future reference.
Please refer all work related to the installation of this product to qualified service personnel or system installers.
•
Do not operate the appliance beyond its specified temperature, humidity or power source ratings.
•
Place the unit on a flat surface not prone to vibration or impact.
•
Use the appliance at temperatures between 32 °F ~ 113 °F (0 °C ~ +45 °C) and relative humidity below 85%. The input
•
power source for this appliance is between 90 ~ 264 Vac, 47 ~ 63 Hz.
Install the unit away from heat sources such as radiators, heat registers and stoves.
•
Installation of the unit near consumer electronics devices, such as stereo receiver/amplifiers and televisions, is permitted as long
•
as the air surrounding the terminal does not exceed the above mentioned temperature range.
Handle hard disk drives with care.
•
It is possible to damage hard drives if they are moved while their motors are still running. To allow the hard drive to spin
—
down and park its heads, wait at least 10 seconds after disconnecting power before moving the unit.
To avoid shock and vibration damage to the internal hard drive, do not move the unit while it is plugged in.
—
Protect hard disk drives from static electricity.
—
Do not stack hard disk drives or keep them upright.
—
Do not use an electric or magnetic screwdriver to fix hard disk drives.
—
Do not place the unit in an enclosed area where the cooling vents are blocked or impede the flow of air through the ventilation
•
openings.
Protect the power cord from being stepped on or pinched particularly at plugs and the points where they exit from the
•
apparatus.
Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and
•
contact qualified service personnel for service.
Handle the appliance with care. Do not drop or shake, as this may damage the device.
•
Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do not install the unit in an area where
•
condensation occurs. Do not operate with wet hands. Take immediate action if the appliance becomes wet. Turn the power off
and refer servicing to qualified service personnel. Moisture may damage the appliance and also cause electric shock.
Do not use strong or abrasive detergents when cleaning the surfaces of this product. When dirt is hard to remove, use a mild
•
detergent and wipe gently.
Do not overload outlets and extension cords. Electric shock or fire may result.
•
Save your system configuration.
•
Distributing, copying, disassembling, reverse compiling, reverse engineering, and exporting, in violation of export laws, the
•
software provided with this product is expressly prohibited.
4-Camera H.264 Security System Setup Guide
SAFETY INSTRUCTIONS
iii
Advertisement
Table of Contents
