Table of Contents
Advertisement
SECTION 7: DVR SYSTEM MENUS
7.2.2 Video System
Set the system output to the camera input (PAL or NTSC). Note: The device will restart when you modify the camera mode.
7.2.3 Time Setup
Click Time [System settings -> System -> Time] to open the Time setup menu.
DATE: Set up system date using the number keypad.
DATE FORMAT: Click the down arrow to switch the date format. Options: YY-MM-DD, MM/DD/YY.
TIME FORMAT: Click the down arrow to switch the time format. Options: 12 HOURS to 24 HOURS.
TIME: Set up the system time using the number keypad on the remote control.
DST: Daylight saving time. ON means DST clock change is enabled. You can setup the start time and end time of DST. For
example, in the right figure above, the start time is at 02:00:00 Sunday of the first week on January. Similarly, setup the end
time.
Note: After changing settings, click the "check" (save) button in the lower right corner of the screen.
7.2.4 User management
Click User [System settings -> System -> User] to open the user management setup menu. This menu allows user to set the
device ID for the DVR and to change the system password. After turning on password and clicking the "check" button in the lower
right corner of the window, exit the system and login again to manage other users.
56
Advertisement
Table of Contents
