Table of Contents
Advertisement
6. If you selected a 12 hour time format, click the q icon on the line below the TIME entry, then select either AM or PM.
7. On the DST line, click the >> icon to open the DST (ON/OFF) option window. If you select ON, a DST setup window will open.
Use the method like that detailed above to setup the DST start and end time, then click the confirm entry check (
lower right corner to confirm your entries.
8. Click the CONFIRM button in the NOTE window.
3.2.2 Change the Admin and user1 passwords
Changing the default Admin and user1 account passwords from their initial (default) value adds security to your system. The
factory default account names and their passwords are:
Admin:
user1:
To change these passwords:
1. With the system powered on, right click twice on the desktop or press the menu button on the front panel twice, then log into
the system as the Admin (if a password login is required).
2. Click the Settings icon on the Tool Bar. The SYSTEM tab window will open.
1. On the USER line, click the >> icon to open the USER MANAGEMENT window.
2. On the CHANGE PASSWORD line, click the >> icon to open the USER MANAGEMENT window.
888888
666666
4-Camera H.264 Security System Setup Guide
SECTION 3: SYSTEM SETUP
a
) in the
17
Advertisement
Table of Contents
