SECTION 2: INSTALLING YOUR SYSTEM
SECTION 2
Installing the System
2.1 Getting Started: Unpacking the Equipment
Your system includes:
4 channel H.264 networkable DVR
•
4 Cameras
•
4 – 60' video/power extension cables
•
Power adapter and 5-way splitter
•
Remote control and USB mouse
•
Monitor (with ECO4LCD only)
•
Quick-start reference guide (this document)
•
Resource Pack Mini-CD with user guides for the DVR, cameras, smartphone applications
•
Remove the equipment from its packaging and place it on a flat, clean surface. Inspect each item. If any visible damage is present,
contact your supplier for a replacement. Verify that your order is complete.
What you need
Although each security system installation is different, most require the following items not included with your system
components:
Tools to install the cameras and route power and video cables
•
Fasteners to attach the cameras to the mounting surfaces
•
A display device and cabling to connect to the DVR (ECO4IR and ECO4IRPROMO systems). The DVR will connect directly to a
•
VGA video monitor, or to a TV with a BNC to RCA adapter and RCA cable. The display device is usually needed only for system
setup. It can be disconnected when the DVR is networked for access across a LAN or Internet.
Uninterruptible power supply (UPS). This device is used to ensure system stability during voltage surges, sags, and outages. If a
•
UPS is not available, a power strip with strong surge protection is highly recommended.
2.2 Camera installation
The CFC6044IR and BC600 cameras are precision instruments that will provide years of quality service when used properly. Included
with each camera is:
An adjustable mounting bracket that is attached to the back of the camera.
•
60' video and power extension cable
•
6