Table of Contents
Advertisement
SECTION 7: DVR SYSTEM MENUS
REMOTE PERMISSION: This feature must be setup if operating the system remotely. Only users with admin privileges
can set other user's remote permissions. These permissions include: Record/Capture, Playback/Download, and Setting. If
password verification is enabled (marked ON, i.e. you must login with a password) you can setup seven user passwords and an
administrator password.
Note: When Password is enabled, login to the system as an admin to manage user settings. The administrator's name
(Admin) cannot be changed. Initially, two users exist: Admin and User1. The default password for Admin is "888888" and the
default password for User1 is "666666".
If forget your password, you can reset the password by shunting the pin of block J17 on main board for 5 seconds while the
system is running. However, REMOVING THE COVER OF YOUR DVR WILL VOID THE WARRANTY.
7.2.5 HDD
Click HDD [System settings -> System -> HDD] to open the HDD (hard disk drive) management menu.
58
Advertisement
Table of Contents
