Table of Contents
Advertisement
SECTION 1: SYSTEM OVERVIEW
Item
Function
5
Menu (MENU/ESC): Displays/exits the main menu.
6
Lock: If the password is enabled, press it to logout the system.
Numerical Button: Use buttons 1, 2, 3, or 4 to select the channel to display.
7
REC: Start or Stop manual recording.
8
9
Quad: Press this button to switch display modes from single channel display to a multi-channel display.
10
Mute: Not used.
Spot View: Press to enable auto sequencing.
11
Fast Forward: Fast forward video during playback.
12
13
Rewind: Rewind video during playback.
Mouse control
The mouse operates just like a mouse on a Windows PC. Connect the mouse to the USB connector in the back panel.
Action
Effect
In live display mode, right clicking to either display or hide the tool bar.
Right click
In main menu or sub menu mode, right clicking to exit the current menu. Note that the settings will not be saved after right clicking.
On menu unlock mode, in the tool bar left click on the SYSTEM SETTINGS icon to enter into the main menu.
After entering main menu, left clicking to enter sub menus.
In menu mode, left click to play one recording file.
Left click to select values in edit boxes or pull-down menus. The system supports special symbols, numbers and letters.
Left click
In the playback mode, left click to control the >> forward function, << reverse function, >>I Slow play function, I> frame play function, >
Play function, and X exit function.
You can left click to adjust color control bar and screen control bar.
In the main menu, sub menu or playback view, left click "x" to exit/close the current menu.
Left click to change the select/deselect a check box in the motion detection menu.
Double click
In live view or during video playback, double-click to maximize channel on the screen.
In the Motion Detection setting interface, left click to drag a frame to set the motion detection area.
Mouse drag
Use the mouse to select menu items.
4
Advertisement
Table of Contents
