TANDBERG 150 MXP User Manual page 53

Administrator Settings – Networks Settings
IP Settings
IP-address. IP-address defines the network address of the codec. This address is used in static mode only. In
DHCP-mode, the assigned IP-address can be found on the Welcome Menu.
IP-subnet mask. IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN
administrator will provide the correct value for this field.
Gateway. When using DHCP , the default gateway will be set automatically. If the LAN utilises static IP addresses,
IP address, subnet mask, and default gateway must be specified by the LAN administrator.
Select this icon and press
OK to leave the menu putting
changes into effect.
Save and Restart. Select this
icon and press OK to restart
the system putting changes
into effect.
TIP! The system will need to be restarted after making changes to IP Settings. This can be done by selecting the Save and Restart. Changes in IP Settings menu will not have any effect until the system is restarted.
D 13640.04
MARCH 2006
Select this icon
and press OK to
Select this
icon and press leave the menu
OK to restore undoing any
the default changes.
settings.
IPv4. IP version 4 supported.
IPv6. IP version 6 supported. IP
Address, IP Subnet Mask and
Gateway will be disabled.
Both. Both IP version 4 and IP
version 6 supported.
53
IP-assignment
DHCP (Dynamic Host Configuration Protocol) can be selected
when a DHCP server is present.
For IPv6, DHCP is used for NTP / DNS Server Addresses. DHCP
IP-address, IP-subnet mask and Gateway are not used because
the DHCP server assigns these parameters.
Static The system's IP-address, IP-subnet mask and Gateway
must be specified in the IPaddress field.
Ethernet Speed
Auto The system will auto-detect the speed/duplex on the LAN.
10/Half The system will connect to the LAN using 10Mbps
speed/Half Duplex.
10/Full 10 Mbps speed/Full Duplex.
100/Half 100 Mbps speed/Half Duplex.
100/Full 100 Mbps speed/Full Duplex.
IP Access Password. By setting an IP Access Password on the
system, all access to the system using IP (Telnet, FTP and
WEB) requires a password. The default IP Access Password is
TANDBERG.
DNS Server 1-5. DNS Server defines the network addresses for DNS
servers. Up to 5 addresses may be specified. If the network addresses
are unknown, please contact your administrator or Internet ervice
Provider.
DNS Domain Name. DNS Domain Name is the default domain name
suffix which is added to unqualified names.
Example: DNS Domain Name is example.com, and the name to
lookup is videosystem will result in a videosystem.example.
com DNS lookup.
TANDBERG 150MXP
USER GUIDE