Page 1
Digital Terrestrial HD Receiver PRIMA VI User manual Bedienungsanleitung Manuel d’Utilisateur Manuale Utente Manual del usuario Manual do Utilizador Felhasználói kézikönyv Instrukcja obsługi Ръководство на потребителя...
8.0 TRoublEshooTIng 9.0 TEChnICAl sPECIfICATIons sTRong declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, Rohs 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
PART 1 • English 1.0 InTRoduCTIon 1.1 safety Instructions do noT InsTAll YouR RECEIvER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots. do noT EXPosE ThE RECEIvER oR ITs ACCEssoRIEs: To direct sunlight or any other equipment that generates heat;...
It is advised not to store important information on USB storage devices used with the receiver. Always make backups of data on your USB storage device before using it with this receiver. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information.
PART 1 • English 2.0 YouR RECEIvER 2.1 dEfAulT PIn: 1234 2.2 front Panel Fig. 1 1. usb Connector for USB storage devices. 2. IR sEnsoR Point your remote control towards this sensor. 3. modE IndICAToR RED indicates that the receiver is in STANDBY mode. GREEN indicates that the receiver is in OPERATING mode.
PART 1 • English 11. ok Menu Off: Displays the current channel list Menu On: Activates the highlighted menu item. 12. RECoRd Records the TV programme to the connected USB storage device 13. TImEshIfT Activates the Timeshift function (Off/On) 14. 0~9 Enters a channel number in viewing mode or a value inside the respective menu 15.
PART 1 • English Audio Amplifier or home theatre system with a suitable cinch cable to the S / PDIF connector on the back of the receiver. 3.5 Connecting to a digital Audio Amplifier and Tv using hdmI Fig. 5 By connecting your receiver to the latest digital amplifiers or Home Cinema systems, preferable with HDMI 1.3 connections, you will enjoy the best possible sound quality and multi-channel audio (depending on broadcast).
5.0 QuICk guIdE To usIng YouR RECEIvER We at STRONG understand that you can’t wait to enjoy your new high definition digital terrestrial receiver. The following quick guide will make you familiar with the basic operation of this device. We do, however, advice you to read the full manual to get the best performance from your receiver.
PART 1 • English 6.1.1 direct access via 0~9 buttons To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the remote control. Channel numbers can be up to four digits long. Entering a number with less than four digits is possible.
PART 1 • English 6.6 Timeshift Timeshift allows you to pause live broadcasts and resume playback later. Press TImEshIfT in viewing mode to activate this mode. On screen the message Timeshift On appears, live TV keeps playing. To pause press the 2 button and press u to resume Timeshifted playback. Press 5 6 for fast rewind/ fast forward.
PART 1 • English 7.1.1.1 Adding channels to favourite lists Channels from the TV Channel List can be added to up to 8 different favourite groups. Press fAv in TV Channel List to access this function. The fAv sign on the top of the screen will move up to indicate that the favourite function is selected.
PART 1 • English Possible methods are: Name (A-Z): Sorting in alphabetical order from A to Z. Name (Z-A): Sorting in alphabetical order from Z to A. Free/Scramble: First in the list will be Free-To-Air channels. Lock: All unlocked channels will placed first in the list. Default: Sorting by searched Order (from lowest to highest frequency or by LCN numbering).
PART 1 • English 7.2 Installation 7.2.1 Auto scan Use pq to select Installation and press ok or u to advance. Select Auto Scan with pq and press ok to enter. Use tu to toggle between Yes or No. When FTA Only is set to Yes, scrambled channels won’t be stored in the channel list.
PART 1 • English Use tu to select the preferred subtitle language. Subtitle Language : Use tu to select the preferred Teletext language (when available). Teletext: Use tu to select the preferred subtitle type to be displayed automatically. Subtitle: Select Normal, Hard of Hearing or Off* * Availability of DVB/HoH subtitles depends on the broadcast.
PART 1 • English 7.3.4 Timer setting This menu allows you to set up to 8 timed events for recording or waking up the receiver. Use pq to select Timer Setting from the System Setup menu and press ok to enter. The receiver will display a list with 8 timers, followed by their respective status.
This receiver is equipped with an Over The Air software upgrade function. An Over The Air update might not be available in your region. Please visit our website www.strong.tv or contact your local service hotline for more information about this option.
PART 1 • English 7.5 games Your receiver is equipped with two games which can be played on your TV screen using the receiver remote control. Use pq to select Game from the Main menu and press ok or u to proceed. Select one of the available games (Othello or Sudoku) using pq and press ok to start the game.
Page 20
PART 1 • English EXIT: One step back or leave the folder and quit the function. music: Press 4 to open a previously created play list. Then you can select the music file that you want to add your play list by pressing 5 (a single file will be added to the play list) or 6 (all files of this directory/folder will be added to the play list).
WARnIng! Please make a backup copy of all data you wish to keep before entering the HDD Format menu. STRONG cannot be held responsible for loss of data from USB devices used with this receiver. Press ok to proceed, select FAT or Cancel, or press EXIT to leave without formatting.
Page 22
Default PIN is 1234 Forgotten channel lock code Contact local Service Hotline or send email to our Support via www.strong.tv After moving the receiver to Antenna signals are too weak Press the Info button on another room/area you are no...
MP3 and OGG * Picture view: BMP and JPEG * STRONG cannot guarantee the playback of video files although extensions are listed, as it depends on codec used, data bit rate and resolution (all MPEG codec formats are supported). Connectors...
Page 24
PART 1 • English general data Supply Voltage: 220 - 240 V AC (SMPS), 50/60 Hz Power Consumption: 3.40 W (typ.), 12.00 W (max) Power consumption in Standby: 0.32 W Operating Temperature: 0 ~ +40° C Storage Temperature: -30 ~ +80° C Operating Humidity Range: 10~85%, RH, Non-condensing Size (WxDxH) in mm:...
Need help?
Do you have a question about the PRIMA VI and is the answer not in the manual?
Questions and answers