PART 1 • English DIGITAL FREE-TO-AIR TERRESTRIAL RECEIVER PRIMA III USER MANUAL Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference. Safety Instructions Always read the safety instructions carefully...
PART 1 • English TABLE OF CONTENTS 1.0 INTRODUCTION 1.1 Main Features 1.2 Accessories 2.0 FRONT PANEL AND REAR PANEL 2.1 Front panel 2.2 Rear panel 2.3 Remote Control 2.4 Installing the Batteries 2.5 Using the Remote Control 3.0 CONNECTIONS 3.1 Connecting to a TV Set 3.2 Connecting to TV and VCR 4.0 FIRST TIME INSTALLATION...
PART 1 • English 1.0 INTRODUCTION PRIMA III is a Free-To-Air digital terrestrial receiver, allowing you to access free-to-air digital terrestrial TV channels and radio broadcasts on your TV set. Its digital reception covers VHF & UHF band. Compared with the analogue TV programs, digital TV programs eliminate the noise and interference but offer high quality video and audio.
PART 1 • English 2.3 Remote Control (Fig. 3) 1. DTV/VCR To switch between the VCR SCART input and the DTV output mode. 2. INFO To display information about the program being viewed or further information about the channel data. 3.
PART 1 • English 3.2 Connecting to TV and VCR NOTE: When connecting the receiver to other equipment, e.g., TV, VCR and amplifier, make sure to refer to relevant user manual for instruction. Also, make sure you disconnect all the equipments from the mains supply before the connection.
PART 1 • English 5.4 Watching Favourite List You can press FAVORITE to watch your preset favourite channels. To create your favourite list, go to Main Menu > TV List. Refer to chapter Creating Favourite Channel Group. 5.5 Displaying information To show the Info Banner press the INFO key.
PART 1 • English 8.1 Creating Favourite Channel Groups Possible via TV or Radio list depending on what channel you will add to FAV list. This feature allows you to group your favorite channels. To create your favorite groups: 1. Select the Heart sign (below channel list) with the channel t/u keys than choose channel with p/q keys which you would like to add to one of the Favorite groups.
PART 1 • English 8.8 Searching for a Channel 1. Select the Search sign (below channel list) with the channel t/u keys than press OK and keypad will appear to insert channel name you're searching for. 8.9 Watching Locked Channels Once a channel is locked, whenever you want to watch a locked channel, correct PIN must be entered.
PART 1 • English Manual Scan If any channel is missing after auto search, or you want to add newly launched channels, you can use Manual Scan to scan the desired channels. To manually search the target channel, you must know its parameters, e.g., the channel number. After the channel is found, it is appended to the current channel list.
3. After restoring defaults, the Setup Installation screen appears. 14.0 SOFTWARE UPDATE Whenever a software update is available on our Website (www.strong.tv), the receiver can be upgraded through USB. (Scr. 36) 15.0 ACCESSORY Includes Gomoku, Calendar &...
Environmental Issues ENVIRONMENTAL ISSUES STRONG is committed to reducing the impact of its products on the environment. To maximise the benefits of our design enhancements, your co-operation is required. Electronic product recycling Packaging Do not dispose of this product with your When disposing of this domestic rubbish.