Communicating with others
1
When the connection destination is displayed, press
p
The FT1DR/DE will switch to transmit mode.
2
Speak into [MIC]
Tip
Place the microphone about 5 cm away from your mouth when you speak.
Caution
Do not continuously transmit over an extended period of time to reduce the risk of
overheating, malfunction, and injury.
3
Release p
The FT1DR/DE will switch to receiving mode.
Tip
You can communicate with the connection destination by pressing p even when viewing data in a
node or room on the Internet using the NEWS function in digital mode (Page 21).
Useful functions in digital mode
Using a preset channel
Programming (presetting) a channel frequency allows you to easily connect to a local
node.
By sharing a channel frequency with other nodes, you can connect the transceiver to a
local node even while you are out. This is useful for a group to operate a station.
● Presetting a channel
1
Press and hold M for 1 second or more
The FT1DR/DE will enter setting mode.
2
Rotate O to select [7 WIRES-X]
3
Press H
The menu list will appear.
4
Rotate O to select [2 RPT/WIRES FREQ]
5
Press H
The selection items will appear.
Connecting to a Faraway Station Using WIRES-X
13