Yaesu FT1DR Instruction Manual page 16

Connecting to a Faraway Station Using WIRES-X
8
Use the keypad to enter the category name.
The characters you have just entered will appear at the
center of the screen.
Tips • Refer to the following table to enter the category name
using up to 16 alphanumeric characters.
Number keys
1
2
3
4
5
6
7
8
9
0
• To modify characters, press F. Pressing F will move the cursor to the left and erase a
character.
• Pressing H will move the cursor to the right.
• To select symbols such as "-" and "/", rotate O.
• You can switch between alphanumeric characters and Japanese katakana by selecting [7
WIRES-X] → [1 LANGUAGE].
9
Press and hold H for 1 second or more.
The screen will return to the category name setting
screen. The category name you entered will appear.
Tip Repeat steps 6 to 9 to set more category names.
10
Press M, 3 times
The category name will be set, and then the screen will return to the frequency
display screen.
● Registering a node or room
1
Connect to the desired node or room.
2
When the connection destination is displayed, press H
The menu list of the connection destinations will appear.
3
Rotate O to select [ADD]
4
Press H
The category list will appear.
5
Rotate O to select a category
6
Press H
The connection destinations list will appear, and then the
name of the node or room currently connected will be
added to the list.
Characters
1
abc2ABC
def3DEF
ghi4GHI
jkl5JKL
mno6MNO
pqrs7PQRS
tuv8TUV
wxyz9WXYZ
0_-%/?!.:#
16