Importing Images; Importing Images From A Local Node - Yaesu FT1DR Instruction Manual

Connecting to a Faraway Station Using WIRES-X

Importing images

You can import images transmitted/received by either a local node, or a node or room
on the Internet onto the FT1DR/DE transceiver.
Cautions
z To import images, insert a microSD card into the FT1DR/DE in advance. For details, refer to "Using
a microSD memory card" in the basic operating manual.
z Imported images cannot be viewed on the FT1DR/DE. To view images after importing, remove the
microSD card from the FT1DR/DE, and then view the data on the card using a PC, etc.

Importing images from a local node

1
Follow steps 1 to 7 in "Viewing text data in a local node" to display the data type
select screen
2
Rotate O to select [PICT]
3
Press H
The data list will appear.
Tip The list will show data in reverse chronological order.
4
Rotate O to select an image
5
Press H
The image data information will appear.
6
Rotate O to select [DOWNLOAD]
7
Press H
Data import will start and [DOWNLOAD] will flash.
After data import completes, [Completed] will appear, and then the data list will
appear again.
Tips • Data in unsupported formats cannot be imported. In such a case, [Not Completed] will
appear, and then the screen will return to the data type select screen.
• When the microSD card does not have enough free space, data cannot be imported. In such
a case, [Memory is full] will appear, and then the screen will return to the data type select
screen.
26
↓
O