Setting The Transmission Frequencies For Repeaters/Wires-X - Yaesu FT1DR Instruction Manual

Using WIRES-X and the GM Function Simultaneously

Setting the transmission frequencies for repeaters/WIRES-X

You can select how to set the transmission frequency used when connecting to a local
node.
1
Press and hold M for 1 second or more
The FT1DR/DE will enter setting mode.
2
Rotate O to select [7 WIRES-X]
3
Press H
The menu list will appear.
4
Rotate O to select [2 RPT/WIRES FREQ]
5
Press H
The selection items will appear.
6
Rotate O to select [MANUAL] or [PRESET]
Rotating O switches between [MANUAL] and
[PRESET].
MANUAL: Set the frequency every time you look for a
local node.
PRESET: Use the preset frequency every time you look
for a local node by setting the frequency in
advance as follows:
Selecting [PRESET] and pressing H will display the
frequency select screen.
7
Rotate O to select the frequency
If you rotate O, the frequency will change by the increments
Tip
specified in setting mode. If you press F and rotate O, the
frequency will change by 1 MHz increments.
8
Press p
The screen will return to the frequency display screen.
B to switch between preset frequency bands.
Tip Press
42