Transmitting Data To A Node Or Room On The Internet - Yaesu FT1DR Instruction Manual

Continue to hold p until
countdown begins.
4
Continue to hold p and speak into the [MIC]
Tip The maximum recording time is 1 minute.
Transmission of the message will begin. The screen will
display
When the message has been transmitted, [Completed] will appear, and then the
menu list of the local node will appear again.
● Transmitting a routine message
1
Follow steps 1 to 5 in "Viewing text data in a local node" to display the upload or
download select screen
2
Rotate O to select [UPLOAD]
3
Press H
The data type select screen will appear.
4
Rotate O to select [VOICE]
5
Speak into [MIC] while pressing p
Tip The maximum recording time is 1 minute.
Transmission of the message will begin. The screen will
display
When the message has been transmitted, [Completed] will appear, and then the
screen will return to the data type select screen.

Transmitting data to a node or room on the Internet

● Transmitting emergency information
1
Display the menu list of the node or room on the Internet
2
Follow steps 2 to 3 in "Transmitting emergency information" under "Transmitting data
to a local node" to transmit a message
Using WIRES-X and the GM Function Simultaneously
is displayed and
and the countdown will be flashing.
and the countdown will be flashing.
37