Yaesu FT1DR Instruction Manual page 10

Connecting to a Faraway Station Using WIRES-X
2
Rotate O to select [ALL]
3
Press H
Accessible node and room lists will appear.
Tips • [Waiting] will keep flashing until the list is displayed.
• Connection destinations are displayed from the room list
and then node list.
• On the connection destination room columns, the number
of activities (the number of nodes connecting to each room)
appears on the right side.
4
Rotate O to select the connection destination
5
Press H
The FT1DR/DE will initiate connection and [Waiting] will
flash.
When connection is successfully established,
[Connected] will appear, followed by the menu list of the
connection destination.
Tip If connection is unsuccessful, an error message will appear
and the screen will return to the list of nodes and rooms.
For explanation of error messages, please refer to the "Error
Message Guide" (page 45).
Tip
You can list items in order according to the number of activities or access history from [7 WIRES-X]
→ [3 SEARCH SETUP] in setting mode.
● Searching by node or room name
1
When the connection destination is displayed, press and
hold H for 1 second or more
The menu list of the local node will appear.
2
Rotate O to select [SEARCH & DIRECT]
3
Press H
The character input screen will appear.
10