Error Message Guide - Yaesu FT1DR Instruction Manual

Error Message Guide

Error messages and explanations.
Displayed when trying to receive data from a local node or a
connection node, but no data was available.
The error message will be displayed for 2 seconds, and then
the previous screen will reappear.
Displayed in one of the following scenarios:
The error message will be displayed for 2 seconds.
• Connection was lost between the local node and the
connection destination node.
• While another transceiver was attempting to establish
connection to a node via the local node, the node was
already connected to another node.
Displayed for 2 seconds when trying to establish connection to
a node via the local node, but the node itself was connected to
another node (except when another transceiver is involved).
Displayed for 2 seconds when trying to establish connection
to a node via the local node, but the node could not be found
(power off, Internet disconnected, etc.).
45