Transmitting An Audio Message; Transmitting Data To A Local Node - Yaesu FT1DR Instruction Manual

Connecting to a Faraway Station Using WIRES-X
4
Rotate O to select [UPLOAD]
5
Press H
The data type select screen will appear.
6
Follow steps 4 to 11 in "Creating and transmitting a message" under "Transmitting
data to a local node" to create and transmit a message
● Transmitting a saved message or image
1
Follow steps 1 to 5 in "Creating and transmitting a message" to display the data type
select screen
2
Follow steps 2 to 7 in "Transmitting a saved message or image" under "Transmitting
data to a local node" to select and transmit data

Transmitting an audio message

You can transmit audio messages spoken into the microphone as data to a local node,
or node or room on the Internet.
Audio files are categorized into the following 2 types.
EMERGENCY:
NEWS STATION:
(LOCAL NEWS)

Transmitting data to a local node

● Transmitting emergency information
1
Follow steps 1 to 5 in "Viewing text data in a local node" to display the upload or
download select screen
2
Rotate O to select [EMERGENCY]
3
Press and hold p
[EMG UPLOAD?] is displayed and a 3-second beep can
be heard.
Tip Releasing
information.
Emergency information. Depending on the node or room
settings, mandatory updates will be supplied to connected nodes
and rooms in 5-minute intervals for 2 hours starting from the
initial dissemination of the news.
Routine message. You can listen to the message anytime you
want as long as the message is not deleted from the node or
room.
p will cancel upload of emergency
36