Communicating With Others - Yaesu FT5DR Instruction Manual

z Specifying the DTMF ID of the node or room you want to connect to
1
While displaying the local node, touch [SEARCH &
DIRECT].
Displays the category list.
2
Touch [SEARCH & DIRECT].
Displays the character input screen.
3
Touch [ID].
Displays the DTMF input screen.
4
Enter the 5-digit DTMF ID.
5
Touch [ENT].
Tips • The connection begins and "Waiting" flashes.
• Once connection is successfully established, the menu
list of the node (room) you are connected to will appear.
• If connection is unsuccessful, an error message appears,
and the screen returns to the node and room list screen.

Communicating with others

1
While displaying the station you are currently
connected to, press PTT.
The transceiver switches to transmission mode.
2
Speak into MIC.
3
Release the PTT.
The transceiver switches to reception mode.
Tip
You can communicate with the node or room you are connected to by pressing the PTT even when
viewing data in a node or room on the Internet using the NEWS function in digital mode on page 20.
13
JQ1YBG-ND1 Shinagawa-
SEARCH & DIRECT
C1:----------------
C2:----------------
C3:----------------
C4:----------------
C5:----------------
#
#22000
JQ1YBG-ND1 Shinagawa-
SEARCH & DIRECT
JA1YOE-ROOM12345 24