Voce PR14037000 Operator's Manual page 55

Press the ▼ (down) key to highlight Delay. The
5.
status line indicates the factory default delay
which is set to 0.1hrs (6 minutes). To change the
value so that the machine will self-clean 12
minutes after a drink is vended press the ↵
(Edit) key to access the Delay sub menu. The
LCD will display the screen as shown. Using the
drink selection keypad, press the sequence
0-0-2 to set the new delay.
Press the ↵ (Edit) key and verify that the status line confirms that Delay (when
highlighted) is set to 0.2hrs.
6. Press the X (Exit) key three times to return to the Timed Events Menu. Using the
sequence described above the operator can quickly and easily set up additional post
vend sanitation event periods for the machine if required.
N.B. A sanitation event, either timed or post vend, dispenses water into the waste
bucket. If the waste bucket reaches its full limit the machine will be "Out Of Service".
7.8.3 Backup Events Menu
This sub menu allows the operator to program the machine to perform an automatic backup of
all user configurable settings and sales data stored in its memory. The default setting for Backup
Events is Off.
From the Main Menu press the ▼ (down) key
1.
until Timed Events is highlighted then press the
↵ (Edit) key.
Once in the Timed Events menu press the ▼ (down) key twice to highlight Backup
2.
Events Menu then press the ↵ (Edit) key. The LCD will display the screen as shown.
Press the ↵ (Edit) key to access the 1 Backup
3.
Data sub menu. The LCD will change and display
the screen as shown. By default the current
State is set to Off as indicated by the status line
at the bottom of the screen.
Press the ↵ (Edit) key to access the State sub
5.
menu. Using the ▼ (down) key, set the state to
On (indicated by the filled radio button).
Press the ↵ (Edit) key and verify that the status line confirms the State is set to On.
6.
51