Voce PR14037000 Operator's Manual page 20

16
Fill a cleaning bucket with hot water and dilute the bactericidal cleaner in accordance with the
instructions on the product packaging. Open the door of the machine.
4.5.1 Ingredient Canisters - Removal and Clean
1. Rotate canister outlets to upright position. Remove
the ingredient canisters. DO NOT place them on the
floor.
2. With a clean, damp sanitised cloth, remove any
ingredient build up on the exterior of the canisters,
paying particular attention to the area around the
canister outlets. Ensure canister outlets are dried
thoroughly after cleaning.
4.5.2 Whipper System
1. Twist and remove mixing bowls and steam hoods (a).
2. Remove the dispense pipes (b) from the plastic
dispense block.
3. Turn the whipper base (c) anti-clockwise until it
releases (first click). Remove mixer units (d) and
impeller (e). Turn the whipper base (c) anti-clockwise
again (second
the shaft.
4. Clean all of the mixing system parts, including the
steam hoods, mixing bowls and dispense pipes
thoroughly in the diluted bactericidal cleaner solution.
Rinse all components with clean water and dry
thoroughly before refitting to machine.
5. Remove and clean the extract tray (see sub-section 4.5.3 Extract Tray for details).
6. Refit the whipper base. Push the whipper base onto
the motor shaft with the "arrow" symbol lined up
with the motor plate fixing screw (f) as shown. Turn
the whipper base clockwise until it locates with the
first (click) locking position (g). Ensure "0" ring (h) is
correctly located as shown.
d click), pull the whipper base from
a
b
e
c
f
g
h
d