Voce PR14037000 Operator's Manual page 48

44
7.6.4 Backup/Restore
This menu allows the operator to manually backup information stored in the machines memory
to the controller board.
N.B. It is also possible for the operator to programme Backup as a timed event, thus ensuring
even greater security for the information stored in memory. This ensures that the machine can
easily be restored to its last operational state should the information be lost through corruption
or power failure (see sub-section 7.8.3 Backup Events Menu for full details).
1. Scroll down and highlight Backup/Restore from
the System Settings menu. Press the ↵ (Edit)
key to access the menu. If this is the first time
that a backup has been selected the LCD will
display the screen as shown.
Press the ↵ (Edit) key to access the menu. The
2.
LCD will display the screen as shown. To back
up the memory press the ↵ (Edit) key. After a
few seconds the machine will beep once and
the Initialising screen will be displayed before
the machine returns to standby mode, ready to
vend.
3. When accessing the Backup/Restore sub-menu
after backups of the memory have been made,
the information changes and the operator is
presented with the screen as shown. The first
sub-menu, Last Backup is highlighted with the
date and time this occurred displayed at the
bottom of the screen.
4. To restore the machines memory to the last
available backup, scroll down using the ▼
(down) key, highlight Restore Data and press
the ↵ (Edit) key to access the menu. The LCD
will display the screen as shown. Press the ↵
(Edit) key to restore the backed up data. After
a few seconds the machine will beep once and
the Initialising screen will be displayed before
the machine returns to standby mode, ready to
vend.
7.6.5 Software Version
The Software version menu displays the version number of the software installed and is for
information only. The menu also displays the current time and date.