Voce PR14037000 Operator's Manual page 24

20
Fill a cleaning bucket with hot water and dilute the bactericidal cleaner in accordance with the
instructions on the product packaging. Open the door of the machine.
The brewer will always return to its fully open position at the end of the vend cycle. In the
unlikely event that the brewer chamber is closed: -
Press '2' on the service keypad, the brewer will start to move and will stop at the open position.
Disassemble the brewer as illustrated:
Clean the Oltre brewer chassis and mounting area using a clean cloth and sanitising solution.
Clean all of the Oltre brewer components, including the steam hood, mixing bowl and dispense
pipe thoroughly in the diluted bactericidal cleaner solution.
Rinse all components with clean water and dry thoroughly before refitting to machine.
4.6.2 Weekly Cleaning Procedure
Important: It is necessary to carry out the cleaning and maintenance procedure outlined on the
following pages on a weekly basis.
Open the door of the machine.
Check that the Oltre brewer(s) are in an open position, if not then press '2' on the service
keypad, the brewer will move and will stop at the open position
Remove the brewer chamber & filter belt assembly, then remove the belt. Place all components
in a suitable container with the recommended mix of de-staining solution; soak for 5 to 10
minutes.
Rinse all parts thoroughly in clean water & re-assembly into the machine.
Press the service keypad Brewer Clean button (4) and the machine will flush the brewer.