Coex® B2C Brewer Unit - Voce PR14037000 Operator's Manual

Remove the brewer waste container from the machine and empty the contents. Wash the waste
container thoroughly and if necessary sanitise using the sanitising solution. Dry using a clean
cloth, then refit to the machine.
N.B. If the feature has been turned on when the brewer waste container is emptied the waste
counter must be reset. To reset the waste counter press button 12 on the service keypad, two
audible bleeps confirm that the counter has been reset to zero.
4.7 CoEx® B2C Brewer Unit
4.7.1 Daily Cleaning Procedure
1. Remove the coffee dispense pipe from the brewer outlet.
Holding the unit as shown in the photograph, lift the
green lever (a) and carefully pull the brewer unit out of
the machine.
Fill a cleaning bucket with hot water and dilute the
bactericidal cleaning agent in accordance with the
instructions on the product packaging.
2. Carefully place the CoEx® brewer unit into the diluted
bactericidal solution and clean the unit thoroughly.
Ensure all coffee ground deposits are removed, paying
particular attention to the area around the top of the
piston and waste chute.
Remove the unit from the solution and rinse thoroughly
with clean water. Dry the unit using a clean cloth or paper
towels.
3. Remove the B2C coffee chute assembly. Unscrew the two
knurled thumbscrews and remove the coffee chute and
coffee chute cover.
With a clean, dry brush clean the area around and under
the coffee dispense outlets.
4. With a clean, dry brush wipe away any coffee deposits
from both the coffee chute and cover mouldings.
Refit the coffee chute lid to the chute ensuring that the
lugs on the cover fit securely into their mounting holes.
Refit the assembly to the machine and secure using the
two knurled thumbscrews.
21
a