Selecting A Drink - Cold Drink Selections; Replacing/Updating Drink Selection Decals - Voce PR14037000 Operator's Manual

10. Other drink choices do not allow the strength
option or milk/sugar to be selected. For
example,
Chocolate selection button, all of the other
selection buttons will be extinguished, the
START buttons will light up and the LCD will
display the screen opposite. The customer
simply presses the START button and the
machine will vend the drink as described above.

3.2 Selecting A Drink - Cold Drink Selections

VOCE machines may be fitted with either a chiller or carbonator unit allowing cold water and
flavoured drinks to be vended, either still or both still and sparkling.
The following example describes how to vend a cold flavoured drink from a VOCE machine fitted
with a carbonator unit.
1. Press the selection button for the cold flavoured
drink required on the keypad. All of the other
drink selection buttons will be extinguished, the
START button will light up and the machine exits
from standby mode. The LCD will display the
screen as shown opposite.
N.B. The default setting for cold drink selections is still.
2. To obtain a Sparkling drink press the current drink selection button. Pressing the
button again will revert back to the Still setting.
3. Once the drink has been selected, press the START button on the keypad. The drink
selection button will flash indicating that the drink is being vended. Unless the
customer has placed their own cup into the dispense area, a cup will automatically be
ejected from the cup drop unit into the dispense area and the drink selection will be
delivered into the cup. Whilst this operation is in progress the LCD will display the
"Serving" screen
4. After the cold drink has been dispensed the LCD will display the message Thank You
and the machine will beep once. The message on the display will change to read
Please remove cup. The drink can then be removed from the dispense area and the
machine will return to standby mode.

3.3 Replacing/Updating Drink Selection Decals

Self-adhesive drink selection and pricing decals are mounted onto a decal carrier located behind
the main panel. To update drink pricing or replace drink description decals, proceed as follows:
1. Open the front door of the machine.
2. Carefully remove the decal carrier from the machine. Place the decal carrier face-up
on a clean, flat surface.
if the customer presses the
13