Section 5 - Service Keypad Functions; Button 1 - Program Entry; Button 2 - Brewer Open (Oltre Brewer); Button 3 - Rinse/Flush - Voce PR14037000 Operator's Manual

24

Section 5 - Service Keypad Functions

VOCE machines are fitted with a service keypad mounted on the rear
of the door. This keypad contains the Operators Program entry key
and also allows the operator to carry out specific functions during
routine cleaning and maintenance.
N.B. During certain operations e.g. View Counters it is necessary for
the operator to utilise the selection keypad and LCD mounted on the
front of the door to access data. Please refer to Section 6 -
Programming Mode for details of selection keypad layouts and
functions.
5.1 Button - Program Entry
This button enables the operator to access the Operators Program (see Section 7).
5.2 Button - Brewer Open (Oltre Brewer)
The brewer should return to its fully open position at the end of the vend cycle. In the unlikely
event that the brewer chamber is closed Press '2' on the service keypad, the brewer will start to
move & will stop at the open position.
5.3 Button - Rinse/Flush
The flush sequence rinses the mixing bowls. Before the sequence begins, the system waits until
the water in the boiler is at the set temperature. In order to guarantee the highest standards of
cleanliness, the boiler fill valve is disabled, ensuring that the water used in the sequence is
delivered at the optimum temperature to kill any micro-organisms. Each hot water valve and the
corresponding whipper are switched on in sequence. Once the flush cycle is complete the
machine returns to standby mode.
1. To flush the machine:
a. Press and release the Flush button (3). The flush sequence begins.
b. Empty the waste water container when complete
Caution: Ensure that a suitable container is placed under the dispense position. Keep
hands away from the dispense area whilst the flushing cycle is in operation.
5.4 Button - Brewer Clean (Oltre Brewers only)
The brewer clean button rinses the Oltre brewer/s.